User Manual Part 2

Devices Tab
SpectraGuard® Enterprise User Guide
62
System unable to Launch Wireshark Dialog
8. On the Error dialog, there are three possibilities:
 You can download and install Wireshark and optionally install WinPcap. Wireshark requires a
compatible version of WinPcap. If the installed version and expected version mismatch, you need
to install the suggested and expected version of WinPcap.
 If the system does not find Wireshark installed at the default location, ‘C:\Program
Files\Wireshark’, Wireshark will not launch automatically. To launch Wireshark manually, click
Browse to specify the appropriate location and click OK.
 To launch Wireshark manually from the command prompt, you need to copy and paste the link to
set up a direct connection with the Sensor and view live packets.
9. If you click OmniPeek, ensure that the application and the OmniPeek Airtight Adapter are correctly
installed. If you have these installed at some other location, click Browse to specify the appropriate
location. The installation location for OmniPeek could be other than the default location, ‘C:\Program
Files\WildPackets\OmniPeek\’.
10. Click OK. The system launches the application and the packet capture session begins immediately.
Alternatively, if you do not have the OmniPeek tool installed, you should install the same with
appropriate purchase from WildPackets Inc. Airtight does not provide installation of OmniPeek.