User Manual Part 1

Devices Tab

SpectraGuard® Enterprise User Guide

2. On the right, a list of devices, and networks tagged to that location appears; select the Networks

tab.

The following figure displays the Networks tab.

Networks tab

The Networks tab shows the following information about the networks detected by the SGE sensors

 Monitored Status:specifies whether the network is monitored or unmonitored by SGE sensor. The icon

indicates that the network is monitored. The icon indicates that the network is unmonitored. This field is

not editable.

 Name: specifies the network name of the network, by default. This is an editable field and can be changed

by the user.

 Network address: specifies the network address of the network.

 Location: specifies the location of the network.

 Monitoring sensor: specifies the sensor name of the sensor that has detected this network.

 Gateway MAC: specifies the MAC address of the gateway. This field cannot be deselected.

 Exposed since: specifies the date and time of exposure. This field is populated if the network is not being

monitored. The date and time when monitoring for the network has stopped, is displayed in this field.

You may configure display columns to view the columns that you want to view. For this, click on the Column

Visibility icon. The following window showing the columns available for display and their current selection and

display order, is opened.