User's Manual

If this device is going to be operated in 5.15 ~ 5.25GHz frequency range, then it is restricted in indoor environment only.
FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure
compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only
certified systems are deployed in the United States. The use of the system in any other combination (such as co-located
antennas transmitting the same information) is expressly forbidden. Only the antennas listed below are allowed to be used
with the radio.
Ant. Antenna
Type
Model Name Product description 2.4/5 GHz
Gain (dBi)
Tx/Rx mode REMARK
1 Omni Ant. 3CWE591
3Com® 6/8dBi Dual-Band
Omni Antenna
6/8
1T1R/
1T1R concurrent
Main Ant. for test
2 Omni Ant. S24513BPX
CUSHCRAFT 2.4~2.5&
4.9~5.9 GHz DUAL BAND
OMNI ANTENNA
6/6.5
1T1R/
1T1R concurrent
-
3 Omni Ant. SS-200-AT-AN-30
Airtight 2.4~2.5& 4.9~5.9
GHz Dual-band
Omnidirectional
Indoor/outdoor antenna
6/6.5
1T1R/
1T1R concurrent
-
4 Omni Ant. TGX-102XNXXX
Joymax Base Station
Antenna
6/6
1T1R/
1T1R concurrent
-
5 Panel Ant. 3CWE596
3Com® 18/20dBi
Dual-Band Panel Antenna
18/20
2T2R/
2T2R concurrent
Main Ant. for test
6 Panel Ant. 3CWE598
3Com® 8/10dBi
Dual-Band Panel Antenna
8/10
2T2R/
2T2R concurrent
-
7 Panel Ant. SL24513P12SMF
CUSHCRAFT Tri-mode,
dual band 802.11b/a/g
ceiling mounted
Omnidirectional panel
antenna
3/3
2T2R/
2T2R concurrent
-
8 Panel Ant. SS-200-AT-AN-10
Airtight dual band
802.11b/a/g
Omnidirectional
Indoor panel antenna
3/3
2T2R/
2T2R concurrent
-
9
Monopole
Ant.
3CWE590
3Com 2dBi Dual-Band
Omni Antenna Kit
2/2 2T3R Main Ant. for test
10 PCB Ant. TFF-A015MPAX-361 Integrated PCB Antenna 3/3 2T3R Main Ant. for test