User's Manual

ServerȱandȱSensorȱOverviewȱ
SpectraGuard
®
ȱEnterpriseȱInstallationȱGuideȱ
4ȱ
Chapterȱ3 ServerȱandȱSensorȱOverviewȱ
ThisȱchapterȱprovidesȱanȱoverviewȱofȱtheȱServerȱandȱSensorȱandȱdescribesȱinȱdetailȱaboutȱtheȱfollowing.ȱ
x FrontȱPanelȱofȱtheȱServerȱandȱSensorȱ
x RearȱPanelȱofȱtheȱServerȱandȱSensorȱ
3.1 FrontȱPanelȱofȱtheȱServerȱ
TheȱfrontȱpanelȱofȱtheȱServerȱhasȱaȱPowerȱswitchȱandȱLEDsȱthatȱindicateȱitsȱstate.ȱTheȱfollowingȱfigureȱshowsȱtheȱlocationȱofȱ
theȱPowerȱswitchȱandȱLEDsȱonȱtheȱfrontȱpanelȱofȱtheȱServer.ȱ
ȱ
Figure 3. Front Panel of the Server
TheȱfollowingȱtableȱdescribesȱtheȱbehaviorȱofȱtheȱPowerȱswitch.ȱ
Table 1. Behavior of Power Switch
Action System Behavior Recommended User Action
Push Power
switch for two
seconds
Graceful shutdown of the
Server (similar to restarting
the Server)
No action is required as the Server
restarts automatically.
Push Power
switch for
more than
three seconds
Hard shutdown of the Server
(similar to disconnecting the
power cable)
Press the Power switch again to power
on the Server. Do not press the Power
switch for a longer time as this may
cause damage to the hard disk and
thereby cause severe data loss.
ȱ
TheȱfollowingȱtableȱdescribesȱtheȱstatusȱLEDsȱonȱtheȱfrontȱpanelȱofȱtheȱServer.ȱ