User's Manual

ConfigȱShellȱCommandsȱ

SpectraGuard

ȱEnterpriseȱInstallationȱGuideȱ

set Commands

Command Description

set allowed ip

Sets the list of IP addresses or subnets that are allowed to

access this device

set cert

Installs a signed SSL certificate issued for the request

generated using 'get certreq'

set date

Sets the current time zone, date, and time information on

the Server; the Server needs to be rebooted for the

date/time information to take effect

set dbserver Starts/Stops the Database Server

set erase Configures the backspace key

set ha Enables or disables High Availability (HA) service

set interface Sets the Network and HA Interface speed and mode

set log config Sets the configuration of the logger

set monitoring

Sets the number of days that the system should keep the

data for all performance monitoring charts

set network

Sets the Network Interface (eth0) configuration including the

IP Address, Subnet mask, Gateway, DNS Address, and DNS

Prefix

set route Allows addition/deletion of routing table entries

set server Starts/Stops the Application Server

set serverid Sets the Server ID

set ssh Starts/Stops the SSH access to the Server

set support

Sets up how, when, where, and what support information is

to be sent

set webserver Starts/Stops the Web Server