User's Guide

AirTight Management Console User Guide
46
The following image illustrates security settings.
The following table explains the fields present on the Add/Edit Wi-Fi profile and in the Security
Settings. Click Security Settings to view fields under Security Settings.
Field
Description
Profile Name
This field specifies the name of the
profile.
SSID
This field specifies the SSID of the wireless profile. This is a
mandatory field.
Broadcast SSID
This check box indicates whether the SSID is to be broadcast or not
for this Virtual AP, in the beacon frames. If selected, the beacon for
this Virtual AP carries the SSID.
Client Isolation
This check box indicates whether communication between 2 wireless
clients of this virtual AP is enabled or disabled. If selected, wireless
client communication
is disabled for the virtual AP.
Enable P2P
Cross Connection
Select this check box to enable to P2P cross connection bit. When a
client
is connected to a Wi-Fi direct network and to an AirTight AP in
an infrastructure network it is possible to bridge these two networks.
When you enable the P2P cro
ss connection bit, the Wi-Fi Direct
network and the infrastructure network can be bridged by the client.
Otherwise, the AP instructs the client not to cross
-connect the
infrastructure network to the
Wi
-Fi Direct network, thus enhancing the security of the wireless
network. The P2P cross connection is disabled, by default.