User's Guide

AirTight Management Console User Guide
214
4.
Click Yes to confirm deletion of the custom filter.
Print Network List for Location
You can print all the information seen for all networks in the upper pane for the selected location. You can
choose the columns to be viewed on the UI by selecting them. The information seen in the upper pane is
the information that will be seen in the printout.
If pagination is enabled, the list of networks on the current page is printed. To print a list of all networks
for a location, you must go to each page and print the individual pages.
If pagination is disabled, only the list of networks visible on the UI is printed. This means that if there are
25 records of which only the first five have been presented on the UI, these five records are printed.
You must enable or disable pagination before you print.
To print the AirTight devices list for a location, do the following.
1.
Click Devices and then click the Networks tab.
2.
Select the location for which you want to print the networks list.
3.
Select the columns that you want in the printed list. Click any column name to select or deselect
columns.
4.
Click the print icon. The print preview of the networks list appears.
5.
Click Print to print the networks list.
Change Network Type
When you upgrade to release 7.1 Update 3 of the AirTight Management Console, all the networks are
marked as Cardholder Data Environment (CDE) networks, by default. If a network displayed in the
Networks tab does not possess or transmit credit card data, you can change the network type to non-
CDE.
Similarly, you can change a non-CDE network to a CDE network.
You can select multiple networks of the same type at a time and mark them as non-CDE or CDE, as
required.
To change the network type of a network, do the following.
1.
Go to Devices
2.
Select the Networks tab.
3.
Select the check box for the network you want to mark as CDE or non-CDE.
4.
Click the down arrow next to the icon on the toolbar. Select CDE or non-CDE as the case may
be. A confirmation message appears.
5.
Click Yes on the confirmation message to change the network type.
The network type is changed and the new network type appears under the Network type column.
Delete Network
To delete a network from the Networks tab, do the following.
1.
Go to Devices
2.
Select the Networks tab.
3.
Select the check box for the network you want to delete.
4.
Click the Delete Network icon.
5.
Click Yes on the Confirm dialog that appears on clicking the Delete Network icon.