User's Guide

AirTight Management Console User Guide
206
To edit a custom filter, do the following.
1.
Go to Devices>APs.
2.
Click the icon next to Filter on the tool bar and select the required filter.
3.
Click the icon next to a column header. A list of options is displayed.
4.
Point the mouse at the Filters option and enter the filter text for the column or make changes to the
filter criteria as required.
5.
Click the icon next to Filter on the tool bar and click Save. The modified custom filter is saved.
Delete Custom Filter
To delete a custom filter, do the following.
1.
Go to Devices>APs.
2.
Click the icon next to Filter on the tool bar and click the icon for the filter to delete. A message
asking you to confirm delete appears.
3.
Click Yes to confirm deletion of the custom filter.
Print AP List for Location
You can print all the information seen for all APs in the upper pane. You can choose the columns to be
viewed on the UI by selecting them. The information seen in the upper pane is the information that will be
seen in the printout.
If pagination is enabled, the list of APs on the current page are printed. To print a list of all APs for a
location, you must go to each page and print the individual pages.
If pagination is disabled, only the list of APs visible on the UI is printed. This means that if there are 25
records of which only the first five have been presented on the UI, these five records are printed.
You must enable or disable pagination before you print.
To print the AP list for a location, do the following.
1.
Go to Devices>APs tab.
2.
Select the location for which you want to print the APs' list.
3.
Select the type of APs for which you want to print the list.
4.
Select the columns that you want in the printed list. Click any column name to select or deselect
columns.
5.
Click the print icon. The print preview of the AP list appears.
6.
Click Print to print the list.
Merge APs
The APs seen in the APs tab could be either a virtual AP or a physical AP. One or more virtual APs could
actually be a single physical entity. You can merge such virtual APs into a single AP through the APs tab
for better management. You can merge authorized APs only.
To merge authorized APs, do the following.
1.
Go to Devices>APs tab.
2.
Select the location for which you want to merge the APs.
3.
Select two or more authorized APs to merge and click More on the toolbar.
4.
Click the Merge option to merge the APs.