User's Guide

AirTight Management Console User Guide
204
You can sort AP details on the columns in the upper pane of the APs tab. You can sort the APs in the
ascending or descending order.
1.
Go to Devices>APs tab.
2.
Select the location.
3.
Point to the column in the upper pane on which you want to sort and click .
4.
You can click the arrow again to reverse the sort order. The icon could be an up arrow or a down
arrow based on the current sort order.
Filter AP Details
You can choose the columns to be viewed or filter the AP information to be displayed on the UI based on
filter text matching the text in the selected column.
For example, if you want to view only the APs with WPA security, do the following.
1.
Go to Devices>APs tab.
2.
Select the location.
3.
Point to Security in the upper pane,click and enter 'WPA' as the filter text.
4.
Press the Enter key to view the APs with WPA security.
To choose the columns to be viewed, do the following.
1.
Go to Devices>APs tab.
2.
Select the location.
3.
Point to any column name in the upper pane, click . A menu appears.
4.
Point to Columns option in the menu and select the check boxes for the columns to be made visible
on the UI. Deselect the check boxes, if they are already selected, for the columns that you don't want
to view on the UI.
Search APs
You can search for an AP using the name of the AP, MAC address of the AP or SSID of the AP.
To search for an AP or APs, do the following.
1.
Go to Devices>APs tab.
2.
Select the location where you want to search APs.
3.
Enter the name, MAC address or SSID of the AP in Quick Search box at the top right corner.
4.
Press the Enter key. The AP or APs that match the search criteria is displayed in the upper pane.
Enable Pagination for AP Listing and Set Page Size
By default, the AP listing in the upper pane is presented in a grid. You can scroll down to the last AP row
in the upper pane without having to browse across pages. A paginated view is also available if you want
to view a page-wise list of APs. You can enable pagination for the APs that are visible to you and
configure the number of rows on each page in the upper pane.
To enable pagination, do the following.
1.
Go to Devices>APs tab.
2.
Click the icon seen on the right side of the tool bar. A message to confirm pagination for all
grids/listings on the UI appears.