User's Guide

AirTight Management Console User Guide
170
Template Settings for more details.
Additional
VLAN
Monitoring
Customized additional VLAN monitoring settings. You can customize the
additional VLANs monitored and override the additional VLANs monitored by
the device and customize the settings. Double
-click here to customize the
additionally monitored VLANs. Refer to
Customize Device Template Settings
for more details.
Is Mesh Root
Node (Radio
<number>)?
Indicates whether or not radio 1 for the AP is in a mesh wireless network and
the AP is a root node .
'Yes' indicates that the AP is a root node. You can edit this field only if the
device template applied to this device has per device customization enabled
on it. You can select 'Yes'only if the radio ha
s a mesh profile attached to it.
'No' indicates that the AP is a non-root node.
Edit Device Properties
Some device properties are editable, others are not. To edit a device property, double-click it, edit it and
save the new value.
Customize Device Template Settings
You can customize and override some settings for a device applied through the device template, if you
have selected the Allow Device Specific Customization check box when defining the device template.
You can customize the radio settings and the additional VLANs monitored in the device properties of the
device.
You can customize the radio settings for an AirTight device operating in the AP mode, by modifying the
radio settings in the Device Properties.
These settings override the settings done through the device template applied to the AirTight device.
To customize the radio settings, do the following.
1.
Click Devices.
2.
Select the AirTight Devices tab.
3.
Go to Device Properties.
4.
Double-click the Radio Settings in Device Properties. You can customize the operating channel
and/or the transmit power of the radio.