User's Guide

167
Devices
The Devices page provides information about APs, clients, and AirTight devices visible to the system.
You can view device properties, sort the display based on their properties, and change the device
template used. You can view the APs, clients, networks associated with the devices.
Select a location to view devices at that location.
The AirTight Devices tab displays a list of AirTight devices associated with the selected location.
The APs tab displays a list of access points associated with the selected location.
The Clients tab displays a list of clients associated with the selected location.
The Networks tab displays a list of networks detected at the selected location.
AirTight Devices
The Devices>AirTight Devices tab displays all the AirTight devices associated with the selected
location. AirTight devices are the access point/sensor devices from AirTight.
Select an AirTight device to view the list of APs, clients and VLANs visible to the AirTight device.
The AirTight Devices tab is divided into two panes. The upper pane shows a list of AirTight devices for
the selected location. On selecting a device on the upper pane, the device properties related to the
selected device are displayed in the lower pane. In the lower pane, you can view a list of VLANs, APs,
and clients visible to the selected device. You can also view in the lower pane, a list of active APs, active
clients visible to the selected device, and the interference experienced by the device during the past 12
hours.
A toolbar is seen between the two panes as shown in the figure below. You can perform various
operations related to the AirTight devices using the options present on the toolbar.
To perform any operation facilitated by the toolbar, you need to select an AirTight device row in the upper
pane.
Note: The options available to perform various operations depend on the role of the user that has logged
in.
A (plus sign) is located on the left most corner of each device row in the upper pane.
Click the to view the a brief description of the AirTight device. The description indicates whether the
device is operating as a sensor or as an AP, and provides information about the radios being used. If the
device is operating as an AP, the frequency band, channel and background scanning information is also
displayed.
If you want to customize the device template settings for a specific device, you can do it through device
properties.