User's Guide

AirTight Management Console User Guide
76
Field Description
options available for Venue type are unspecified Educational; School,
Primary; School, Secondary; and University or College
Venue
Name
Name of the venue. Maximum length is 252 bytes. Up to 32 venue names
can be added.
Language
Code
The language code in which the service is to be provided. Refer to the ISO
639.2 standard for the language codes.
5. Enter domain name of the Hotspot 2.0 operator. Click Add to add it. You can enter multiple
domain names in this manner. A maximum of 32 domains can be added. The size of the
domain name must not exceed 255 bytes.
6.
Under 3GPP Cellular Network Info List, enter the 3 digit mobile country code, the 2-3 digit
mobile network code and click Add to add to the list. You can add up to 32 entries here.
7.
Enter the NAI Realm and click Add. You can add upto 32 such realms, each with length upto
255 bytes.
8.
Select the EAP method for that realm and click Add. You can add upto four EAP methods for
one realm. You can see the EAP methods specified for a particular realm when you click the
EAP Settings link for that Realm in the Realm box. The EAP methods must be added in the
sequence of preference. The most preferred EAP method must be added first, followed by the
second prefered method and so on.
9.
Enter the WAN metrics as described the table below.
Field Description
Link Status
Select the appropriate option. The following options are available.
Link up- Select this option if the link is up.
Link down- Select this option if the link is down.
Link in test- Select this option if the link is under test.
Not Configured- Select this option when the link status is not configured.
Symmetric
Link Status
Select the Same option if the uplink and downlink speeds are the same.
Select the Different option if the uplink and the downlink speeds are
different.
Downlink
Speed
Downlink speed, in Kbps or Mbps. Select the appropriate unit of
measurement of the speed after entering the value for the downlink
speed.
Uplink Speed
Uplink speed, in Kbps or Mbps. Select the appropriate unit of
measurement of the speed after entering the value for the downlink
speed.
10. Enter the operator friendly name list details. You can have up to 32 entries in the list.
Field Description
Name
The operator friendly name of the Hotspot 2.0 operator in different
languages. The maximum length must not be more than 252 bytes.
Language
Code
The language code in which the operator friendly name has been specified.
Refer to the ISO 639.2 standard for the language codes.
11. Enter the connection capability details for the network to which the mobile device connects or
requests information from. Based on the port configuration, ensure that you have configured
an appropriate firewall rule in the firewall settings of the Wi-Fi profile. Refer to the following
screenshots for an example of the connection capability and the corresponding rule under
firewall settings. In the connection capability, the port is closed for ICMP requests. The
complementary firewall rule prevents ICMP requests that might result in a denial-of-service
attack. The protocol number 1 in the firewall rule refers to ICMP.