User's Guide

ManualsBrandsMojo Networks ManualsElectronicsAccess Point / Sensor

AirTight Management Console Configuration

This parameter can be used by the external portal to implement SSID profile specific functionality. For

example, each SSID can have a separate portal page.

10.

Click Save to save the settings.

Configure External Portal Parameters

You must configure the external portal parameters if you want to redirect users to a portal page hosted on

an external server.

All request and response attributes that are marked with an asterisk are mandatory. The request

parameters/attributes are sent from the AP to the external portal. The response parameters are sent from

the external portal to the AP. These parameters are used in the name - value pairs in the redirection URL.

The following table explains the request and response attributes in detail.

Request

Attributes

Description

Request Type

field name for request type field.

Challenge

field name for random text used for authentication.

Client MAC

field name for the MAC address of the client.

AP MAC Address

field name for MAC address of the access point that is

communicating with the external portal.

AP IP Address

field name for the IP address of the access point that is

communicating with the external portal. This should match the

field name used by the external portal.

AP Port Number

field name for the AP port number on which the AP and external

server communicate.

Failure Count

field name for the count of the number of failed login attempts.

Requested URL

field name for the requested URL that is the URL requested by the

client through the AP, to the external server.

field name for the login URL.

Logoff URL

field name for the logoff URL.

Remaining Blackout

Time

field name for the remaining blackout time.

Service Idenitifier

name of the portal parameter that is used to pass the service

identifier value to the external portal. The service identifier value is

specified in the Captive Portal section of the SSID Profile. This

parameter can be used by the external portal to implement SSID

profile specific functionality like different portals for different SSIDs

etc.

Response

Attributes

Description

Challenge

field name for the challenge

Response Type

field name for the response type.

Challenge Response

field name for the challenge response.

Redirect URL

field name for the redirect URL

field name for login timeout.