User's Guide

AirTight Management Console Configuration
147
which AirTight WIPS communicates.
Port Number
Port number of the HP MSM Controller from which data is
imported.
Authentication
Type of authentication for MSM Controller.
Select the Secure HTTP (SSL/TLS) option if the MSM Controller
is configured to use HTTPS for authentication.
Select the HTTP Authentication if HP MSM Controller requires
HTTP authentication.
Username
User name for HP MSM Controller HTTP authentication. This field
appears only when authentication is selected.
Password
Password for HP MSM Controller HTTP authentication. This field
appears only when authentication is selected.
Using Client Certificate
Select this check box if client certificate is used. This field is valid
only if secure HTTP authentication is selected.
Note: If the MSM Controller is setup to use client authentication,
ensure that the AirTight WIPS client certificate is uploaded into
the HP MSM Controller's trusted CA certificate store.
Data import enabled
Select this check box to enable the import of data from HP MSM
controller.
6. Click Save to save the changes.
Print HP MSM Controller List for Location
You can print a list of HP MSM Controllers for a location.
1.
To print the HP MSM controller, do the following.
2. Go to Configuration>WIPS>WLAN Integration>HP MSM Controller.
3. Select the location for which you want to print the list of HP MSM controllers.
4. Click the print icon in the toolbar. The print preview of the list of HP MSM controllers appears.
5. Click Print to print the list of HP MSM Controllers for the selected location.
Delete HP MSM Controller
To delete the HP MSM controller, do the following.
1.
Go to Configuration>WIPS>WLAN Integration>HP MSM Controller.
2. Select the location for which you want to delete the list of HP MSM controllers.
3. Select the check box for the HP MSM Controller you want to delete.
4. Click the delete icon in the toolbar. A message asking to confirm deletion appears.
5. Click Yes to confirm deletion.
Enable Integration with HP MSM Controllers
To enable an HP MSM Controller, do the following.
1.
Go to Configuration>WIPS>WLAN Integration>HP MSM Controller.
2. Select the location for which you want to enable integration with HP MSM Controllers.
3. Select the HP MSM Integration Enabled check box to enable integration with HP MSM Controllers.
4. Click Save to save the changes.