User's Guide

AirTight Management Console Configuration
145
Print Aruba Mobility Controller List for Location
You can print a list of Aruba Mobility Controllers for a location.
To print a list of Aruba Mobility Controllers, do the following.
5.
Go to Configuration>WIPS>WLAN Integration>Aruba.
6. Select the location for which you want to print the Aruba Mobility Controller list.
7. Click the print icon to print the list of Aruba Mobility Controllers. A print preview appears.
8. Click Print to print the list.
Configure Integration with HP MSM Controller
The HP MSM Controller manages a collection of thin APs. Configure integration with HP MSM Controller
using the Configuration>WIPS>WLAN Integration>HP MSM Controller option.
The HP MSM architecture consists of MSM Controllers and the APs that are managed by these
controllers. Integration with HP MSM Controller allows the AirTight WIPS server to fetch information about
Synchronized APs. Using this information, the AirTight WIPS server automatically classifies these
devices.
Select the HP MSM Integration Enabled check box to enable integration for all configured controllers.
Enabling the MSM Controller integration allows the system to obtain data from the configured controllers.
Enabling / Disabling individual controllers is also possible.
The Current Status displays Running if integration is enabled, and it displays Stopped if controller
integration is switched off.
The Status for each individual controller displays Error if

One of the configured and enabled MSM Controllers has a hostname which cannot be resolved
 One of the configured and enabled MSM Controllers is not reachable
 System server is stopped
 Internal error (Contact Technical Support)
Configure Automatic Synchronization Settings
Under Automatic Synchronization Settings, select the Synchronization Interval. The
Synchronization Interval specifies the interval after which the server synchronizes with the HP MSM
Controller. The default value is 15 minutes. A maximum value that can be specified here is 60 minutes.
Manage Client Certificate
When the MSM Controller is configured to communicate with client programs using Secure HTTP and
Client Authentication, a client certificate is uploaded into the MSM Controller’s Trusted CA Certificate
Store. Click Download Client Certificate to download a pre-generated client certificate for AirTight
Management Console.
Note: To customize the client certificate refer to the CLI commands: get msmcontroller cert, get
msmcontroller certreq, and set msmcontroller cert as described in Config Shell Commands in the
Installation guide.
Add HP MSM Controller
You can add multiple HP MSM controllers to integrate with AirTight WIPS.
To add a HP MSM controller, do the following.