User's Guide
AirTight Management Console User Guide
144
SNMP Version
SNMP version.
Select SNMPv2 if the v2 is the SNMP version.
Select SNMPv3 if the v3 is the SNMP version.
Community String
User-defined community string using which AirTight WIPS
communicates with Aruba Mobility Controller. Default value is
'public'.
Data Import Enabled?
Select the check box to enable import of data from Aruba Mobility
Controller.
Import Managed APs
Select this check box to import managed APs from Aruba Mobility
Controller.
Import Managed Clients
Select this check box to import clients associated with APs
managed by Aruba Mobility Controller.
Import Managed Client Associations
Select this check box to import information related to AP-client
association for APs managed by the Aruba Mobility Controller.
Import Unmanaged APs
Select this check box to import APs not managed by the Aruba
Mobility Controller.
Import Unmanaged Clients
Select this check box to import clients associated with APs not
managed by Aruba Mobility Controller.
Import Unmanaged Client
Associations
Select this check box to import information related to AP-client
association for APs not managed by the Aruba Mobility Controller.
Import Signal Strength Information
Select this check box to import APs not managed by the Aruba
Mobility Controller. Note: Location Tracking results may vary
depending on the Aruba AP models used in the network.
4. Click Save to save the changes.
Edit Aruba Mobility Controller settings
You can edit Aruba mobility Controller settings.
To edit Aruba Mobility Controller settings, do the following.
1.
Go to Configuration>WIPS>WLAN Integration>Aruba.
2. Select the location for which you want to edit the Aruba Mobility Controller.
3. Select the check box for the Aruba Mobility Controller to edit.
4. Click the edit icon.
5. Make the required changes.
6. Click Save to save the changes.
Delete Aruba Mobility Controller
You can delete the details of an Aruba Mobility Controller. Once deleted, AirTight WIPS will not retrieve
any details from this Aruba Mobility Controller.
To delete Aruba Mobility Controller details, do the following.
1.
Go to Configuration>WIPS>WLAN Integration>Aruba.
2. Select the location for which you want to delete the Aruba Mobility Controller list.
3. Select the check box for the Aruba Mobility Controller to delete.
4. Click the delete icon to delete details of the Aruba mobility controller.