User's Guide

AirTight Management Console Configuration
141
Select SNMP v1,v2 check box to send traps to all Trap receivers accepting traps using SNMP v1, v2
protocol. You can change the Community String for the SNMP agent. All SNMP v1, v2 Trap receivers
configured, should use this community string to receive traps.(Default: public).
Select the SNMP v3 check box, to send traps to all Trap receivers accepting traps using SNMP v3
protocol. You can configure the individual parameters that is, Username, Authentication Password,
Privacy Password, Authentication Protocol and Privacy Protocol, while adding the trap
receivers/destinations. All SNMP v3 Trap receivers configured, should use these parameters to receive
traps.
Engine ID is not editable.
Default Username is admin; default Authentication Password is password, default Privacy Password is
password, default Authentication Protocol is MD5 and default Privacy Protocol is DES.
Under SNMP MIBs, you can choose to query by enabling or disabling the following SNMP MIBs
individually.

IF MIB
 Host Resources MIB
 AirTight-MIB: If selected, the system enables the external SNMP Trap receivers to receive traps.
 MIB-II: If selected, configure the System Contact, System Name, and System Location.
(Default System Name: Wi-Fi Security Server).
Starting with version 6.7.U5, MIB-II ‘System Description (sysDescr)’ has been changed to ‘AirTight
SpectraGuard Enterprise, Version xxx’ and MIB-2 ‘System Object ID (sysOID)’ has been
changed to ‘.1.3.6.1.4.1.16901.1.1.1’.
Apart from this, with version 6.7 U5, SNMP traps are generated whenever any monitoring service
crashes, and this service is restarted successfully by the health-check daemon. Please refer to AirTight
MIB for more details.
IF MIB, Host Resources MIB, and MIB II are standard MIBs that you can download from the Internet. For
AirTight-MIB, contact AirTight Technical Support.
Add SNMP Trap Destination Server
Under SNMP Trap Destination Servers, click Add to open SNMP Configuration dialog where you can add
SNMP server details.
Destination Server (IP Address/Hostname): Specifies the IP address or the hostname of the SNMP server
to which events should be sent.
SNMP Protocol Version: Specifies the SNMP protocol version for the SNMP agent. (Default: SNMP v3)
Port Number: Specifies the port number on the receiving system to which the SNMP trap is sent. (Default:
162)
Enabled?: Specifies if the SNMP server is enabled to receive SNMP traps. (Default: Enabled)
User name: Specifies if the SNMP v3 user name. (Default:admin)>
Authentication Password: Specifies if the SNMP v3 authentication password. (Default: password)
Privacy Password: Specifies if the SNMP v3 privacy password. (Default: password)
Authentication Protocol: Specifies if the SNMP v3 authentication protocol. (Default: MD5)
Privacy Protocol: Specifies if the SNMP v3 privacy protocol. (Default: DES)
Note: You must specify a different port number if another application uses the default port. For every
combination of authentication and privacy protocol, you must specify a different user name for v3 get/trap
parameter.
Click Add to add the details for a new SNMP server.