User's Guide

AirTight Management Console User Guide
128
5.
Change the required settings and save the changes. Refer to Customize Device Template Settings
for details on customizing these settings.
Note: You can specify the customized settings at a later point, even if you enable per device
configuration in the device template.
Edit Device Template
To edit a device template, do the following.
1.
Go to Configuration>Device Configuration>Device Templates.
2. Click the link with the device template name.
3. Change one or more of the following values.
Field Description
Template Name
A unique name of the device template. The name can
contain a maximum of 40 characters.
Description
A brief description of the device template. The description
should not exceed 500 characters in length.
Allow Device
Specific
Customization
Select this check box to override the settings done
through device template. Refer to Override Device
Template Settings for further details.
Operating
Region
Region or country of operation of the AirTight device.
4. Click Device Settings to make changes, if any, to device settings. Refer to Device Settings for further
details.
5. Click Radio Settings to make changes, if any, to radio settings. Refer to Radio Settings for further
details.
6. Click Save to save the device template settings.
IMPORTANT: You can edit a device template at a selected location, only if you have defined the device
template at that location.
Search Device Template
You can search for device templates based on the template name.
To search for a device template, do the following
1.
Go to Configuration>Device Configuration>Device Templates.
2. On the Device Templates page, type in the keyword or search string for the template name Quick
Search box on the top right corner.
3.
Press Enter to filter the list of templates based on the keyword or the search string. The device
templates matching the search criteria appear in the device template listing.
Copy Device Template
You can copy a device template to another location. A copied device template is editable at the new
location.
To copy a device template from one location to another, do the following.