User's Guide

AirTight Management Console Configuration
111
Add Child Server to Server Cluster
There are two ways to add a child server to a server cluster.
1.
Use the server cluster setup wizard available after executing the cluster set command. This has
been explained in the Set up Server Cluster section.
2. Execute cluster add child command. This command must be executed on the command line of
the parent server. This is explained below.
To add a child server to a server cluster using the cluster add child command, do the following.
1.
Login to the server command line interface of the parent server with "config" user credentials.
2. Execute the command cluster add child on the command line. You are prompted to enter the
name for the child server to be added to the server cluster.
3.
Enter a suitable name for the child server. You are prompted to enter the hostname or IP address of
the child server.
4.
Enter the hostname or IP address of the child server. You are prompted to enter the "config" user
password for the child server.
5.
Enter the "config" user password. If all the data entered is correct, the server having the specified
hostname/IP address is added as a child server in the server cluster.
Refer to the screenshot below for the cluster add child command.