Installation Instructions
Table Of Contents
C
-65 Installation Guide 18
Table 5-1 get Commands
get Commands
Command
Description
get ap
Displays all the currently visible APs
NEW
get channel
util
Displays the current channel utilization in %, non-Wi-Fi interference in %, and noise
floor values in dBm when device is in AP mode. The radio must have at least one
active virtual AP to get the channel utilization statistics. You can choose to fetch the
current utilization or to auto-read the channel utilization statistics every 5 seconds.
Press Ctrl+C to stop auto-read.
get interface
Displays network interface speed and mode
get ip config
(deprecated)
Displays the IP information
get log
Displays the log information as it is created
get log config
Displays the configuration of the logger
get mode
Displays the mode in which the device is currently configured
get rf
Displays if RF monitoring for the device is ‘ON’ or ‘OFF’
get serial num
Displays the board number
get server
discovery
Displays the server discovery/setting information
get status
Displays the current running status of all the components
get version
Displays the version and build information of all the components
get vlan config
Displays VLAN configuration. Both static and dynamic information is displayed.
get vlan id
Displays listing of all VLANs which can be detected by ND.
get vlan status
Displays status of VLANs which are configured for monitoring by ND.
get vlan
connectivity
Pings the specified VLAN other than the communication VLAN.
get model
Displays the AP model.
get antenna
Displays antenna configuration (internal/ external).
get route
Displays IP routing table entries.
get client logs
Gets client connection logs as it happens.
get wired trace
Performs packet capture on Ethernet interface(eth0) upto file size 5MB.
get ap status
Displays wireless profiles and associated clients.
get presence
notification
parameters
Displays the value of the presence notification parameters, that is, RSSI value in dbm,
time interval in seconds, and IP address or host name of the presence notification
server.