Assembly & Operation Instructions

MoJack 750XT Lift

Assembly Instructions

STEP 5

Nylock Nut

Carriage Bolt

Crank Handle

Tower

Attach the Crank Handle to the Tower by inserting

Carriage Bolt with threads facing up and fasten with

Nylock Nut .

Note: There are two holes in the Crank Handle. The hole

closest to the rubber grip will provide a 6” radius for crank-

ing. The other hole will provide an 8” radius, making crank-

ing easier. Use the hole that works best with your model of

lawn mower.

STEP 6

Hang the Lift Arm on the Carrier by hooking

the slotted area of the Lift Arm under the top bar

of the Carrier. Lift Arm must be inserted from the

front and then lowered which fastens Lift Arm into

place. Insert Clevis Pin through the hole in the

Carrier and lock by fastening the Small Hair Pin

to the Clevis Pin.

Lift Arm

Top Bar of Carrier

Carrier

Attach the Grip Handle to the Tower with

two Carriage Bolts and two Nylock Nuts .

STEP 4

Nylock Nut

Carriage Bolt

Tower

Grip Handle

7 1

13 15

Small

Hair Pin

Clevis