Assembly & Operation Instructions

MoJack 750XT Lift

Push Pin

Lift Arm Insert

Wheel Pad

Safety Holes

Operating Instructions

Preparing the MoJack 750XT for Storage (Steps 17 - 20)

STEP 16

Removing the Mower from the MoJack 750XT

• Remove the Safety Straps from front mower tires.

• Removing Support Rods is optional during this step.

• Drive or roll the mower off of the Wheel Pads.

STEP 15

Lowering the Mower

• Remove wheel chocks.

• Release the parking brake.

• Mower must be in neutral.

Disengage transmission if neccessary.

• Pull and hold the Carrier Locking Pin

out and turn the Crank Handle

counter clockwise until

Wheel Pads are rmly on

the ground. The Carrier

Locking Pin must be pulled

out until it clears the bottom

Safety Hole. Do not force the

handle past the lock point,

as this may damage the

Screw Thread.

Safety Hole

Carrier

Locking

Pull Out

to Unlock

and Lower

STEP 17

Removing the Wheel Pads

• Remove Wheel Pad Push Pins

and pull Wheel Pads out from

the Lift Arm Inserts.

• Store the Push Pins in the

Wheel Pads.