Use & Care Guide

ManualsBrandsMoJack ManualsAutomobile AccessoriesWorkbench Attachment

MoJack WorkBench MoJack WorkBench

10 11

Operating Instructions for use with MoJack PRO

STEP 1

Move push mower onto sleds

• With the carrier arm fully lowered, lift the front

end of the push mower onto the sleds and

then move the push mower so that the front

wheels of the push mower are touching the

front of the sleds.

• Secure the push mower to the sleds by

attaching the Clevis Pin and Hair Pin

as shown.

5 6

STEP 2 (Optional)

With the WorkBench inserts secured between

the sleds. Place desired object to be lifted

onto the inserts.

Front wheels

touching front

of sled

Clevis Pin

Hair Pin

WorkBench Insert

STEP 5

Lowering the Mower

• Turn the Winch Handle 1/2 turn clockwise and squeeze the

Grip Handle and Ratchet Release Handle together. Keeping the

Grip and Ratchet Release Handles squeezed together, turn the

Winch Handle counterclockwise until the Wheel Pads are ﬁrmly

on the ground.

Grip Handle

Ratchet

Release

Handle

1/2 Turn

Operating Instructions for use with MoJack PRO

STEP 3

Raising the Mower

• Raise the mower by rotating the Winch Handle clockwise.

Do not attempt to lift more than 200 lbs.

The MoJack must be used on a solid level surface.

The mower engine must be turned off.

If using the WorkBench Inserts, do not install past safety sticker.

STEP 4

Locking Carrier into the Safety Ratchet

• As the Carrier raises, the clicking sound indicates that the

Safety Ratchet is functioning properly. Once the mower is

at the desired working height, rotate the Winch Handle 1/2

turn counterclockwise to release the tension off of the

Lifting Strap and allowing the Carrier to rest ﬁrmly on the

Safety Ratchet.

Safety Ratchet

Lifting Strap

1/2 Turn

Winch Handle