Full Product Manual

Élévateur MoJack PRO
54
Programme d’entretien
• Avant chaque utilisation, véri ez toujours si les pièces sont
usées, desserrées ou endommagées sur le MoJack PRO.
En présence de pièces endommagées, n’utilisez pas le
MoJack PRO et communiquez avec MoJack au 1-877-575-
3173.
Véri ez la sangle de sécurité avant chaque utilisation.
Assurez--vous que la sangle de sécurité n’est pas
endommagée ou tordue et que la couture de la boucle est
solide. En présence d’un de ces problèmes, n’utilisez pas le
MoJack PRO et communiquez avec MoJack au 1-877-575-
3173.
Véri ez le fonctionnement du cliquet de sécurité.
Pendant que le transporteur s’élève, le son indique que le
cliquet de sécurité fonctionne correctement. Soulevez le
transporteur à la hauteur de travail et tournez la poignée du
treuil ½ tour en sens anti-horaire pour libérer la tension de
la sangle de levage. Si le transporteur ne repose pas ferme-
ment sur le cliquet de sécurité et que la tension demeure
sur la sangle de sécurité, n’utilisez pas le MoJack PRO et
communiquez avec MoJack au
1-877-575-3173.
Appliquer de la graisse au lithium sur le petit rouage du
treuil et entre le petit rouage sur le treuil et le mécanisme de
freinage, et des dents et le boulon de la barre de sécurité
une fois par an ou tous les 50 utilisations.
Sangle de
levage
Treuil
Petit engrenage
Treuil
Transporteur
Cliquet de
sécurité
Mécanisme
de freinage
Appliquez de la
graisse au lithium
Transporteur
MoJack PRO Lift
3
Warnings and Safety Instructions
IMPORTANT: The MoJack PRO is intended for use with riding lawn mowers and riding lawn tractors only. Do not
exceed 750 lbs. It should never be used to service other types of machinery unless there is an approved MoJack
accessory tted for the type of machinery. Please consult your local MoJack dealer or distributor.
Read and understand all safety and operating instructions before using the MoJack PRO.
Never allow anyone unfamiliar with the safety or operating instructions to use the MoJack PRO.
Follow all safety and servicing instructions provided by the lawn mower’s manufacturer before using
the MoJack PRO.
Do not modify the MoJack in any way. Any modi cations will void any and all warranties and could
compromise your personal safety.
When using the MoJack PRO, keep ALL bystanders at a safe distance away from the MoJack PRO.
The MoJack PRO must be used on a solid level surface.
Do not lift the front end and the back end of the mower at the same time.
Do not use MoJack PRO lift for anything other than a mower, unless the proper accessory is used.
Always stop engine and remove key before beginning any work on the mower.
Never operate the mower’s engine while using the MoJack PRO.
Do not exceed the lifting capacity of 750 lbs.
If the MoJack PRO Tower is leaning while lifting or lowering the mower, this indicates an overload
condition. Remove the mower immediately.
Tower must be locked in place with the Tower Locking Pin before using the MoJack PRO.
Do not remove safety warnings or decals from MoJack PRO.
Before each use, always check for any worn, loose or damaged parts on the MoJack PRO. If any
damaged parts are present, do not use the MoJack PRO and contact MoJack at 1-877-575-3173.
Do not climb on mower while it is lifted, being lifted or being lowered.
No one should be on the mower while it is lifted, being lifted or being lowered.
After the mower is raised to a working height, always place wheel chocks (not included) behind the back tires
of the mower.
Wheel Pads must be equal distance from the Lift Arm to maintain proper balance.
Remove all mower attachments before using the MoJack PRO.
Failure to follow these warnings may result in property damage and serious bodily injury or death.