Product Manual

MoJack XT Lift

Assembly Instructions

STEP 5

Nylock Nut

Carriage Bolt

Crank Handle

Tower

Attach the Crank Handle to the Tower by inserting

Carriage Bolt with threads facing up and fasten with

Nylock Nut .

Note: There are two holes in the Crank Handle. The hole

closest to the rubber grip will provide a 6” radius for

cranking. The other hole will provide an 8” radius, making

cranking easier. Use the hole that works best with your

model of lawn mower.

STEP 6

Hang the Lift Arm on the Carrier by hooking

the slotted area of the Lift Arm under the top

bar of the Carrier. Lift Arm must be inserted

from the front and then lowered which fastens

Lift Arm into place. Insert Clevis Pin through

the hole in the Carrier and lock by fastening the

Small Hair Pin to the Clevis Pin.

Lift Arm

Top Bar of Carrier

Carrier

Attach the Grip Handle to the Tower with

two Carriage Bolts and two Nylock Nuts .

STEP 4

Nylock Nut

Carriage Bolt

Tower

Grip Handle

7 1

13 15

Small

Hair Pin

Clevis