Product Manual

MoJack XT Lift

Small Hair Pin

Clevis Pin

Lift Arm Insert

Push Pin

Lift Arm

Lift Arm Insert

Operating Instructions

STEP 20

THE MOJACK XT IS NOW READY FOR STORAGE OR TRANSPORT.

Folding the MoJack XT

• Raise the carrier 8” above the base by turning the

Crank Handle clockwise.

• Pull and rotate Tower Locking Pin 90 degrees to the

unlocked position.

• Raise the Tower out of the Base by pulling up on the

Lift Handle and then lower the Tower.

• Secure the Tower by rotating Tower Locking Pin until

the ring drops into locking slot.

STEP 19

Unhooking the Lift Arm

• Remove Small Hair Pin

and Clevis Pin from Lift Arm.

• Unhook the Lift Arm from

the Carrier.

• Store the Small Hair Pin

and Clevis Pin in the

Lift Arm.

STEP 18

Removing LIft Arm Inserts

• Remove Lift Arm Push Pins and pull

Lift Arm Inserts from the Lift Arm.

• Store the Push Pins in the Lift Arm.

Lift Arm

Carrier

Tower Locking Pin

(locked position)

Tower Locking Pin

(unlocked position)