User guide
16
STEP 14
Preparing the Mower for Service
• Place wheel chocks (not included) behind the back res of the mower.
• If accessible, set park brake by hand – do not climb on machine.
• The Carrier Locking Pin must be locked into one of the two
Safety Holes.
Operang Instrucons
Wheel Chock
STEP 12
Raising the Mower
• Raise the mower by rotang the Crank Handle clockwise.
• See Step 22 for raising the mower with drill aachment.
If the li Tower is leaning while liing or lowering the mower, this
indicates an overload condion. REMOVE THE MOWER IMMEDIATELY.
The jack must be used on a solid level surface.
The engine must be turned o and key removed.
The mower must be in neutral when raising or lowering to allow the
wheels roll as the mower is raised or lowered.
The parking brake must be o during this step.
Always use included safety straps. The Safety Straps must be rmly ghtened.
STEP 13
Raising the Mower to Locking Posion
• Raise the Li Arm unl the Carrier Locking Handle drops into one of
the two Tower Holes. The Tower Locking Holes are the automac
safety engagement system.
• The Carrier Locking Handle automacally drops into the
Tower Holes as the Carrier passes the Tower Holes when raising.
Locking engagement occurs at 20” and 25”.
NOTE: When lowering the Li Arm, the Carrier Locking Handle must be
held out by the operator unl it clears the boom Tower Hole.
NOTE: The XD Li is equipped with a clutch to protect itself from
accidental damage. If the Carrier Locking Handle is not disengaged
when lowering, the clutch will release the Crank Handle from the
screw and rotate freely. To re-engage the Crank Handle,
turn clockwise for a few turns.
Carrier
Locking
Handle
25” – Second
Locking Hole
height
20” – First
Locking Hole
height
Tower Locking Holes
are the automac
safety engagement
system
Do not exceed the liing capacity of 500 lbs. (226 kg) front end
weight. If you have a queson regarding weight of your machine,
please contact the manufacturer at 1-877-575-3173 or a local
John Deere Dealer.
Mower deck must be raised to highest seng.