Replacement Part List

Install 701-0002 Multi Hitch
Weldment on top of tractor
hitch plate
Install 701-0008 Hitch
Support Weldment
under tractor hitch plate
- Secure using (1) 003-
0063 M12 x 40mm
screw and (1) 002-0002
M12 Nut
Determine which side of
the mower the transmission
main housing is located on
Using (1) 003-
0062 M10 x 25
Carriage Screw and (1) 002-
0001 M10 Nut, install 701-
0013 Pivot Bracket
Weldment on the opposite
side of the tractor from the
transmission main housing
If possible mount Pivot
bracket in center position
Install 701-0015 Reaction Bar
Weldment into Pivot Bracket
using (1) 001-0059 Clevis Pin
and (1) 001-0010 Hair Pin
Install (1) 003-0061 M10 x
50mm Screw and (1) 002-0026
M10 Jam Nut into welded nut
on Hitch Support Weldment
Tighten 003-0061 M10 Screw
so that top of Reaction Bar
applies pressure to inside of
tractor frame and tighten Jam
Nut
Loosely install (2) M8
Lock Nut on to U-Bolt
Temporarily remove
existing nut
Install 711-0006 Long
Support Bracket and secure
using existing nut
Using (1) 003-
0075 M8 X 25, (1)
M8 Flat Washer and (1) M8
Lock Nut, attach 711-
0006 Long
Support Channel to bottom of
hitch. Tighten all hardware.
Install Hitch Pin and Hair Pin
ZTR Hitch Assembly
Tube Type without Factory hitch mount
Lawn Tractor Hitch Assembly
2