Replacement Part List

The Tool Carrier Accessory is to be used with the Multi-Use
Hitch mount ONLY and is SOLD SEPARATELY.
1. Assemble (2) Vertical Supports to Base Frame using (8) M8
X 16 Screws.
2. Assemble (2) Upper Frames to Vertical Supports using (8)
M8 X 16 Screws
4. Assemble (2) Lift Handles to Vertical Supports using (4) M8
Locknuts.
5. Assemble Support Tube to Base Frame using (2) Hitch Pins
and (2) Hair Pins
6. Using Hitch Pin and Hair Pin provided with Multi-Hitch
assemble Tool Carrier to Multi-Hitch
Tool Carrier Assembly Instructions
Customer Service Phone: [phone]. www.themojack.com. This produce has a 30 day limited warranty. For
questions call the listed phone number or submit your question through the website.