Use and Care Manual
MoJack PRO Lift
9
Assembly Instructions
THIS COMPLETES ASSEMBLY.
Wheel Pad
STEP 10
Ready the Wheel Pads for installation by adding Sup-
port Rods and Hair Pins .
5
11 22
Hair Pin
22
Support Rod
11
Push Pin
21
STEP 11
Slide the Wheel Pads onto both sides of the
Lift Arm Inserts and secure with Push Pins .
Note: The Wheel Pads can be moved in or out to t dif-
ferent mower widths. Use the conguration that works
best with your model of lawn mower.
5
6 21
Lift Arm Insert
6
Wheel Pad
5
Lift Arm
2
Push Pin
21
Slide Lift Arm Inserts into both sides of the
Lift Arm and secure with Push Pins as shown.
STEP 9
6
2 21
Lift Arm Insert
6
Lift Arm Insert
6
Push Pin
21
STEP 8
Hang the Lift Arm on the Carrier by hooking
the slotted area of the Lift Arm under the top bar
of the Carrier. Lift Arm must be inserted from the
front and then lowered which fastens Lift Arm into
place. Insert Clevis Pin through the hole in the
Carrier and lock by fastening the Hair Pin to
the Clevis Pin.
2
20
22
Lift Arm
2
Top Bar of Carrier
Clevis Pin
20
Hair Pin
22
Carrier