Installation Guide

866.729.2378 | www.moistureshield.com 25
9.
letting the bottom rail hang freely between the posts. Check for level.
Note: It is recommended to use the box as a pad to prevent scuffing of the painted finish. If installing square
balusters, make sure they are properly seated in the slot on the underside of the top rail to prevent twisting.
10.



and make certain the rail is plumb.
11.


12.

13. If a deck board is to be installed on top of the rail, carefully measure and cut the

from the underside of the rail as shown, with the appropriate fasteners under the
flange of both sides of the rail.
14.

     
FULLY ASSEMBLED RAIL SECTION