Installation Guide

866.729.2378 | www.moistureshield.com 21
Lay a top and bottom magnum rail along the edges of the steps and up next to
the post.
A. Position both rails for marking with the 2-5/8-inch leg lying on the steps.
B. Mark the rails on the inside faces of the two upright posts.
C. 
Position bottom magnum rail 1/2-


from scrap material.
Cut ends of two balusters at the
same angle as the top and bottom
magnum rails and use them as the
post balusters.
To complete stair railing follow steps #1B
through #7 from the composite railing
installation section.
3.
4.
5.
6.
