Installation Guide

866.729.2378 | www.moistureshield.com 20

no more than 72-inches from outside to outside at the angle of the stairway when using as a stair rail. Guard rail sections are sold in 72-
inch lengths and must be trimmed to fit between the posts. Allow for decrease in length from angle cuts.

A. Follow step #2 in the decking installation instructions


Install deck boards. Boards may be flush with riser or extend past
the riser by 1-inch. Use two, 2-1/4-inch, #7 stainless steel trim
head screws per board per stringer.
A. along
each stair rise.
B. Install post collars if desired.
C. Cut and install trim board on stringers if desired. Use procedures in step #8 from the composite
railing installation section.
1.
2.
STAIR RAILING
