Installation Guide

866.729.2378 | www.moistureshield.com 18
Use the formula below to determine the amount of balusters you
need and the spacing between them. Measure the distance in
inches between the inside of one post baluster to the inside of the
other post baluster. This is your total space.
A. number.
This is the number of additional balusters you need.
B. 
total space.
C. spacing
between the balusters. You may want to cut two spacer blocks
from scrap material or a baluster, the same width as answer C, and
use these two spacers at top and bottom to place each baluster.
Attach post caps to
top of post.
Attach baluster to top and bottom magnum rails using one,

distance between balusters, visible opening – check local

7.
9.
8.

· 3-1/2-inches between balusters is always a good starting
point.


outdoor adhesive can be used for
caps. See page 11 & 12 for face
screw options.