Installation Guide

866.729.2378 | www.moistureshield.com 17
Secure bottom magnum rail to each post baluster using two,
2-1/4-inch, #7 stainless steel trim head screws, repeat on other
end of bottom magnum rail.
Place a support block every two feet between bottom rail and
decking for support. Secure support block with one, 2-1/4-inch,
#7 stainless steel trim head screw through the bottom rail into the
support block.



magnum rail directly into each post. Countersink the screws no
more than ¼ inch. To avoid potential splitting, drill a lead hold
with a 7/64 drill bit at a 45-degree angle, one-inch away from the
end of the magnum rail.
4. 5.
6.
Baluster
1-1/4"
4"
3"