Installation Guide

866.729.2378 | www.moistureshield.com 13
Deckfast
®
Fascia System is designed to handle the large amount
of expansion and contraction that can occur with composite deck
fascia boards.
The system consists of two precisely engineered components:
1. the pre-drilling and countersinking Fascia Tool, based on
patented Smart-Bit
®
technology
2. specially designed color matched Fascia Screws
The right way to install fascia
Space for
expansion and
contraction
PATENTED
1
Pre-drill with
Fascia Tool
2
Drive Fascia
Screw
The Fascia Tool creates an over-sized hole so that the board can
expand and contract freely without applying significant force to
the screw. The system is designed for use with ½” to ¾” composite
fascia profiles.*
Fascia Screws are available in both Headcote
®
stainless steel and
epoxy coated carbon steel, in colors to match popular decking
products. This system is the recommended method to install
MoistureShield fascia.
*Note: For PVC deck fascia, use Headcote
®
Trim 1⅝” screws (without pre-drilling).
Starborn Industries, Inc. 45 Mayfield Ave, Edison, NJ 08837 · P. 800-596-7747 · W. www.starbornindustries.com
MoistureShield is a registered trademark of Oldcastle APG - A CRH Company.
MoistureShield
®
Approved
Fascia Fastening Solution
Fascia Plug Tool
Patented
1
Pre-drill using
the Fascia Plug Tool
2
Set screw using the
PVC/Composite Tool
3
Tap in plug with smooth
faced hammer