Instructions / Assembly

866.729.2378 | WWW.MOISTURESHIELD.COM
Attach posts to stair stringers (stringers should be placed 9-inch OC or less). Square posts to stringers and level. Be sure
posts measure no more than 72-inches from outside to outside at the angle of the stairway when using as a stair rail. Guard rail
sections are sold in 72-inch lengths and must be trimmed to fit between the posts. Allow for decrease in length from angle cuts.
72" Maximum
A. Follow step #2 in the decking installation instructions
to install posts to stair stringers (use corner post blocking
method).
Install deck boards. Boards may be flush with riser or extend
past the riser by 1-inch. Use two, 2-1/4-inch, #7 stainless
steel trim head screws per board per stringer.
A. Optional: Cut and install ‘kick boards’ (deck boards) along
each stair rise.
B. Install post collars if desired.
C. Cut and install trim board on stringers if desired. Use procedures in step #8 from the
composite railing installation section.
1.
2.
STAIR RAILING
INSTAL LATION