Instructions / Assembly
866.729.2378 | WWW.MOISTURESHIELD.COM
Secure bottom magnum rail to each post baluster using two,
2-1/4-inch, #7 stainless steel trim head screws, repeat on
other end of bottom magnum rail.
Place a support block every two feet between bottom rail and
decking for support. Secure support block with one, 2-1/4-
inch, #7 stainless steel trim head screw through the bottom
rail into the support block.
Place top magnum rail on balusters (see railing orientation for
details) and repeat fastening as in step 3. In addition, angle
(toe nail) two 2-1/4-inch , #7 stainless steel trim head screws
from top magnum rail directly into each post. Countersink the
screws no more than ΒΌ inch. To avoid potential splitting, drill
a lead hold with a 7/64 drill bit at a 45-degree angle, one-inch
away from the end of the magnum rail.
3. 4.
5.
Baluster
1-1/4"
4"
3"