SDS
Laminate Flooring and Trims
I N D U S T R I E S
I N C
Section 8. Exposure controls/personal protection
Hand protection
Use a properly fitted, particulate filter respirator complying with an approved standard if
a risk assessment indicates this is necessary. Respirator selection must be based on
known or anticipated exposure levels, the hazards of the product and the safe working
limits of the selected respirator.
Use gloves appropriate for work or task being performed.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts.
Eye/face protection
Respiratory protection
:
:
:
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
:
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation.
Appropriate engineering
controls
:
Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures
:
Control parameters
Individual protection measures
Skin protection
Other skin protection
:
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
United States
Occupational exposure limits
None.
Canada
Occupational exposure limits
Ingredient
List name
ppm
mg/m³
Other
ppm
mg/m³
Other
ppm
mg/m³
Other
Notations
Aluminium oxide
US ACGIH 4/2014
-
1
-
-
-
-
-
-
-
[a]
AB 4/2009
-
10
-
-
-
-
-
-
-
BC 7/2013
-
1
-
-
-
-
-
-
-
[b]
ON 1/2013
-
1
-
-
-
-
-
-
-
[a]
Aluminium oxide, as Al
QC 1/2014
-
10
-
-
-
-
-
-
-
[c]
TWA (8 hours)
STEL (15 mins)
Ceiling
Form:
[a]Respirable fraction [b]Respirable [c]Total dust.
Mexico
Ingredient name
Aluminium oxide
NOM-010-STPS (Mexico, 9/2000).
LMPE-PPT: 10 mg/m³ 8 hours.
Exposure limits
4/9