SDS

Date Printed: 8/16/2018 Product: M285-3011B
5. Fire-fighting Measures
SPECIAL FIREFIGHTING PROCEDURES: Evacuate all persons from the fire area to a safe location. Move non-burning material, as
feasible, to a safe location as soon as possible. Fire fighters should be protected from potential explosion hazards while extinguishing
the fire. Wear self-contained breathing apparatus (SCBA) and full fire-fighting protective clothing. Thoroughly decontaminate all
protective equipment after use. Containers of this material may build up pressure if exposed to heat (fire). Use water spray to cool
fire-exposed containers. Use water spray to disperse vapors if a spill or leak has not ignited. DO NOT extinguish a fire resulting from
the flow of flammable liquid until the flow of the liquid is effectively shut off. This precaution will help prevent the accumulation of an
explosive vapor-air mixture after the initial fire is extinguished.
FIREFIGHTING EQUIPMENT: This is a NFPA/OSHA Class 1B or less flammable liquid. Follow NFPA30, Chapter 16 for fire
protection and fire suppression. Use a dry chemical, carbon dioxide, or similar ABC fire extinguisher for incipeint fires. Water may be
used to cool and prevent rupture of containers that are exposed to heat from fire.
6. Accidental Release Measures
ENVIRONMENTAL MEASURES: No Information
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Follow personal protective equipment recommendations
found in Section VIII. Personal protective equipment needs must be evaluated based on information provided on this sheet and the
special circumstances created by the spill including; the material spilled, the quantity of the spill, the area in which the spill occurred,
and the training and the expertise of employees in the area responding to the spill. Never exceed any occupational exposure limits.
Shut off ignition sources; including electrical equipment and flames. Do not allow smoking in the area. Do not allow the spilled product
to enter public drainage system or open waterways.
7. Handling and Storage
HANDLING: Avoid inhalation and contact with eyes, skin, and clothing. Wash hands thoroughly after handling and before eating or
drinking. In keeping with safe handling practices, avoid ignition sources (smoking, flames, pilot lights, electrical sparks); ground and
bond containers when transferring the material to prevent static electricity sparks that could ignite vapor and use spark proof tools
and explosion proof equipment. Empty containers may retain product residue or vapor. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose container to heat, flame, sparks, static electricity, or other sources of ignition. Any of these actions can
potentially cause an explosion that may lead to injury.
STORAGE: Keep containers closed when not in use. Store in cool well ventilated space away from incompatible materials.
8. Exposure Controls/Personal Protection
Ingredients with Occupational Exposure Limits
Chemical Name ACGIH TLV-TWA ACGIH-TLV STEL OSHA PEL-TWA
OSHA PEL-CEILING
ethanol N.D. 1000 ppm 1000 ppm N.D.
butanol 20 ppm N.D. 100 ppm N.D.
pm acetate N.D. N.D. N.D. N.D.
titanium dioxide 10 mg/m3 N.D. 15 mg/m3 N.D.
iron oxide 5 mg/m3 N.D. 10 mg/m3 N.D.
carbon black 3 mg/m3 N.D. 3.5 mg/m3 N.D.
pigment N.D. N.D. N.D. N.D.
isopropanol 200 ppm 400 ppm 400 ppm N.D.
aliphatic hydrocarbons 100 ppm N.D. 500 ppm N.D.
aliphatic petroleum distillates N.D. N.D. N.D. N.D.
aliphatic petroleum distillates N.D. N.D. N.D. N.D.
crystalline silica 0.025 mg/m3 N.D. 50 µg/m3 N.D.
calcium carbonate N.D. N.D. 15 mg/m3 N.D.
Further Advice: MEL = Maximum Exposure Limit OES = Occupational Exposure Standard SUP = Supplier's Recommendation
Sk = Skin Sensitizer N.E. = Not Established N.D. = Not Determined
US_GHS_SDS (English)
Page 3 / 7