Warranty Guide
MOHAWK TECHNICAL SERVICES DEPARTMENT | 508 EAST MORRIS STREET, DALTON, GA. 30721 | 800.833.6954 0949_2020 | SV | 06/2020 | 3 of 4MOHAWK TECHNICAL SERVICES - HARD SURFACE | MOHAWK_TECH@MOHAWKIND.COM | 888.387.9881 0949_2020 | AA | 08/2020 | 3 OF 4
5-YEAR LIMITED LIGHT
COMMERCIAL WARRANTY
Mohawk is so condent in the design and durability of our ooring products, that we back them with a 5-year Limited Light Commercial Warranty. This Warranty
covers defects in material and/or workmanship which relate to joint integrity, staining, fading, and wear through during normal use.
Joint Integrity
The Uniclic
®
system will not fail.
Stain Resistance
Mohawk Laminated Wood ooring will resist staining.
Fade Resistance
Mohawk Laminated Wood ooring will resist fading from exposure to sunlight or articial light.
Wear Resistance
Mohawk Laminated Wood ooring wear layer will not wear through the design layer.
To qualify for any repair or replacement, you will need to provide the original dated sales receipt or other documentation to demonstrate proof of purchase.
For your records, ll in the following information and keep in a safe place with your original documentation.
Lowe’s Store Number __________________________________
Lowe’s Store Address _________________________________
Purchase Date ________________________________________
Product Name _______________________________________
The above mentioned warranties do not apply to:
• all food areas, such as, but not limited to, restaurants, cafeterias, bars, kitchens
• all institutional applications, such as, but not limited to, hospitals and government buildings
• heavy commercial areas, such as, but not limited to, airports, lobbies, mall corridors, schools
• beauty salons, barber shops, dance halls/studios, gymnasiums
• other areas that have heavy trafc or immediate access to street trafc
THIS EXPRESS WARRANTY IS THE SOLE WARRANTY EXTENDED AND ANY IMPLIED WARRANTIES ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE
BY LAW. MOHAWK IS NOT RESPONSIBLE FOR CONSEQUENTIAL, SPECIAL OR INDIRECT DAMAGES.
Some states do not allow for disclaimer of implied warranties or limitation of damages, so this disclaimer may not apply to you.
General Terms and Conditions for Commercial Warranty
Mohawk Laminated Wood ooring carries the specic warranties listed above. In addition to the requirements specied for each of those particular warranties,
the following general terms and conditions also apply. If you have questions regarding the warranty information, please contact the manufacturer, distributor,
retailer or our website www.mohawkooring.com
1. This warranty applies only to the rst owner and the rst installation of the product and may not be transferred. The “rst owner” is the person stated as
the buyer on the purchase document(s). This warranty applies only to rst quality Mohawk brand product purchases made after the edition date of these
warranty conditions for the designated time period when the product is installed according to the manufacturer’s recommended installation instructions.
2. This product warranty only applies to defects inherent to the material supplied. This means any material or production defects, acknowledged by the
manufacturer. It includes the delamination or reduced resistance of the wear layer. Mohawk will repair or replace the material only, at its option. When
replacement of the ooring is made, only new panels from the current product range at the time the complaint is upheld will be supplied by the distributor
or retailer. There will be no other form of compensation. Mohawk is not responsible for labor charges, installation charges, or similar costs. Responsibility
under this warranty only applies to hidden defects. These are defects that were not visible before or during the installation of the Mohawk Laminated
Wood oor. Visibly defective panels should never be installed. Mohawk can never be held liable and is not responsible for any secondary damage or
consequential damages.
3. The joint integrity warranty on the Uniclic
®
joint only applies to permanent open joints greater than 0.01 inches (0.2mm).