Use and Care Guide

2
Mohawk Luxury Vinyl Flooring
Care and Maintenance
072020
DO NOT use the following on your Mohawk LVT floor:
• Soap based detergents
• Abrasive or mop-and-shine products
• Floor wax
• Ammonia or bleaches; for spot treatment or stain removal, use a diluted 10:1 solution of water to
liquid bleach
• Vacuum cleaner with a rotating beater bar
Always read the cautionary information on all cleaners prior to use.
IMPORTANT: Never push, pull or drag furniture, appliances or other items across the floor. Always place
hardboards over flooring or lift and carry furniture and other heavy items.
Treating Stains, Spills and Scuffs
Follow the remedies in order. Unless instructed otherwise, use a clean, white cloth or towel with products
recommended for Mohawk LVT flooring. Always rinse the affected area with clean water after treatment.
Stain or Spill — acids, alkalis, blood, ketchup, mustard, food, fruit, fruit juices, candy, cleaners, strong soaps, dye,
dye markings, urine and feces, grass, iodine, mercurochrome and rust
The Remedy
• First, remove as much solid material as possible.
• Scrub area with cleaner at full strength.
• Rub the area with a 10:1 dilution of water to liquid bleach.
• Rub the area with isopropyl alcohol.
• If stain does not respond, use lemon juice or a cream of tartar solution.
Stain or Spill — dried cleaning fluids, lacquer and latex paint, nail polish, solvents, oil-based paints, wood stains
and varnish
The Remedy
• If substance is dry, gently peel it from the floor. Avoid sharp instruments that could scratch floor.
• Scrub area with non-abrasive cleaner.
• Rub lightly with odorless mineral spirits or paint thinner.
NOTE: Do not use acetone or nail polish remover.