Technical Specifications

Page 1
PRE-MIXED FLEXIBLE GROUT
For use with all ceramic & porcelain tile
Technical Data Sheet
™
DESCRIPTION
Mohawk
®
Fast Tile
™
Grout is a premium, pre-mixed water-based
grout offering the ultimate in color accuracy, water resistance, and
stain and crack protection. This grout is designed to pair with the
Mohawk
®
Fast Tile
™
 oating  oor system and offers the highest
performance resin system of any pre-mixed grout available. This quick-
setting formulation installs up to 50% faster than traditional grouts and
never needs to be sealed. Mohawk
®
Fast Tile
™
Grout is approved for
intermittent water exposure after only 3 days of cure (review technical
data sheet for more details). Unlike other grouts that contain loose
color pigments which can cause staining or be washed away during
the installation process, Mohawk
®
Fast Tile
™
Grout contains quartz
aggregate and is color coated to ensure perfect consistency every
time. Mohawk
®
Fast Tile
™
Grout contains antimicrobial protection
which helps protect against the growth of bacteria, mold and mildew
on the surface of the dried grout and enables it to offer resistance to
stains caused by mold.
APPLICATIONS
Suitable applications include interior and exterior, residential and
commercial installations with ceramic, porcelain, glass, metal and
natural stone tiles on  oors and walls in dry to intermittent wet
applications. It can be used in horizontal ( oor) grout joint widths
from 1/16" to 1/2" and vertical (wall) grout joints from 1/16" to 1/4".
ENVIRONMENTAL
Mohawk
®
Fast Tile
™
Grout is engineered to appeal to today’s green
conscious marketplace seeking to help construction projects obtain
U.S. Green Building Council LEED
®
certi cation. Its unique combination
of features and bene ts produces one-of-a-kind speci cation potential
for architects and designers. See tile manufacturer’s instructions
regarding compatibility and installation details.
FEATURES
• Designed for locking tile systems
• Does not require grout sealer
• Can be exposed to intermittent wet areas in just 3 days
• Pre-mixed, for easy installation
• Water clean-up
• Resistant to stains and chemicals
• No pigment
• No additional admixtures
• No shading or color streaking
• UV-stable
• Re-sealable container
• Non-sag formula ideal for vertical surfaces
MAINTENANCE
After grout has completely cured, for daily cleaning, use a neutral
pH, water-based cleaner designed to be used for ceramic tile.
Periodically or when grout joints appear soiled, a mild abrasive
everyday household cleaner such as Soft Scrub
®
with bleach may
be used. Apply Soft Scrub
®
with bleach directly on the grout joint
and allow it to sit for approximately 5 minutes. Then, gently scrub
TYPICAL PHYSICAL PROPERTIES
Description Results
Water Cleanability (per ANSI 118.3) Pass
Density 13.8 lbs/gal
Vertical Joint Sag (per ANSI 118.3) Pass
Installation Temperature Range
40°F to 100°F
(4°C to 38°C)
Shelf Life
2 years (in original
unopened container)
Compressive Strength >3,500 psi
*
Tensile Strength 510 psi
Recycled Content
8% pre-consumer
recycled glass
VOC Content
35 g/L (as calculated by
SCAQMD Rule #1168)
* Test results were performed in an actual grout joint.
KEY FEATURES
•
Consistent Color
•
No Sealing Required
•
Superior Water Resistance
•
Stain Resistant
•
Indoor/Outdoor
•
Antimicrobial
Superior Water Resistance