Installation

3
Note: Protect containers from freezing in transit and storage. Provide for heated
storage on site and deliver all materials at least 24 hours before work begins.
LIMITATIONS
For interior installations only.
For floors with asbestos-containing material please refer to Mohawk Group Installation
Guidelines.
Do not install when the moisture vapor emission rate (MVER) exceeds 5 lbs. per 1,000
sq. ft. per 24 hours when using the anhydrous calcium chloride test (ASTM F1869).
Do not install when the relative humidity (RH) of the concrete slab exceeds 80%
(ASTM F2170).
Use only when the substrate temperature is between 65°F and 85°F.
pH reading should be a maximum of 9.0.
Building owners should be advised of Mohawk Group flooring installation guidelines for
climate control settings (temperature and humidity). These conditions must be
monitored and kept constant in order to ensure the overall performance and long-term
success of the installation.
MIXING
Ready to use; no mixing is necessary.
Note: Choose all appropriate safety equipment before use. Refer to Material Safety
Data Sheet (MSDS) for more information.
PRODUCT PROPERTIES
Polymer type:
Vinyl Acrylic
Percent solids
55% to 65%
VOCs (Rule #1168 of California’s SCAQMD):
Less than 34 g/L
Trowelability:
Light
Consistency:
Creamy
Color:
Light Green
Shelf life:
2 years when stored in original packaging at 73°F (23°C)
Storage conditions:
Protect from Freezing
Flash point (ASTM D56):
>212°F (100°C)
NOTE: Protect from traffic 24 hours for light traffic, 72 hours for heavy traffic. Protect
containers from freezing in transit and storage. Provide for heated storage on site and
deliver all materials at least 24 hours before work begins.