EcoFlex Literature

160 4 industrial #lWE$BMIPVO("rr www.mohaw kgroup.com
INSTALLATION SPECIFICATIONS
Suggested Adhesive
Backing
Adhesive Application Method
Moisture & pH Spread Rate
EnPress PSA
(M001)
5lbs/ 80% RH,
5-9 pH
25-40 SY/Gal
EcoFlex ICT
* Mohawk OptiSeal required for installations with subfloor moisture exceeding 5 lbs and/or 80% RH.
Maximum allowable moisture with OptiSeal is 90% RH.
* See Mohawk Group official warranty documents for further details at www.mohawkgroup.com
LEED and the related logo is a trademark owned by the U.S. Green Building Council and is used with permission.
WEAR – The Mohawk Group warrants for the life of the
carpet that the carpet modules will not wear more than
10% of the surface pile for the life of the carpet. “Wear”
mean the fiber loss from the carpet modules through
normal abrasion and does not include crushing, flatten-
ing of the carpet pile in any area, staining, soiling, fading,
change in carpet module appearance, nor fiber loss due
to abnormal usage of the carpet module.
STATIC PROTECTION – The Mohawk Group warrants for
the life of the carpet that the carpet modules will not give
static discharges in excess of 3.5 KV when tested under
AATCC Test Method 134-1979.
EDGE RAVEL/ ZIPPERING – The Mohawk Group warrants
for the life of the carpet that the carpet modules will not
zipper or develop continuous “pile yarn runners.”
DELAMINATION – The Mohawk Group warrants for the life
of the carpet that the carpet modules will not delaminate.
Chair pads are not required for this warranty but are
recommended for maximum appearance retention.
DIMENSIONAL STABILITY – The Mohawk Group warrants
for the life of the carpet that the carpet modules will not
lose their dimensional stability (i.e. shrink, grow, cup,
dome) due to normal variations in atmospheric changes
(temperature and/or humidity) or when maintained in
accordance with the Mohawk Group’s recommended
maintenance procedures.
LIFETIME LIMITED MODULAR WARRANTY*
EFICT SLT0003527
3/8” roller or
1/16” x 1/32” x 1/32”
U-Notch Trowel