EcoFlex NXT Specification Sheet

INSTALLATION SPECIFICATIONS
* See Mohawk Group official warranty documents for further details at www.mohawkgroup.com
LEED and the related logo is a trademark owned by the U.S. Green Building Council and is used with permission.
carpet that the carpet modules will not wear more than
10% of the surface pile for the life of the carpet. “Wear”
means the fiber loss from the carpet modules through
normal abrasion and does not include crushing, flattening
of the carpet pile in any area, staining, soiling, fading,
change in carpet module appearance, nor fiber loss due
to abnormal usage of the carpet module.
the life of the carpet that the carpet modules will not give
static discharges in excess of 3.5 KV when tested under
AATCC Test Method 134-1979.
for the life of the carpet that the carpet modules will not
of the carpet that the carpet modules will not delaminate.
Chair pads are not required for this warranty but are
recommended for maximum appearance retention.
for the life of the carpet that the carpet modules will not
lose their dimensional stability (i.e. shrink, grow, cup,
dome) due to normal variations in atmospheric changes
maintenance procedures.
LIFETIME LIMITED MODULAR WARRANTY*
EFNXT SLT0003528
Suggested Adhesive
Backing
Adhesive Application Method
Moisture & pH Spread Rate
EnPress NXT 3/8” roller or 5lbs/ 80% RH,
EcoFlex NXT
(M002) 1/16” x 1/32” x 1/32” U-Notch Trowel 5-9 pH
25-40 SY/Gal
* Mohawk OptiSeal required for installations with subfloor moisture exceeding 5 lbs and/or 80% RH.
Maximum allowable moisture with OptiSeal is 90% RH.
Adhesive Installation Method/
Backing
Application Method
Moisture & pH
Spread Rate
Apply to back of the tiles per
Monolithic, Quarter Turn,
Flexlok
installation guidelines OR Refer
5lbs/ 99% RH, Mulitdirectional - 150 SY/Box
to installation guidelines on TDS.
5-9 pH
Brick and Vertical Ashlar - 110 SY/Box