User's Manual

www.mog-technologies.com
PAGE 11 | 25
BrightVR Stream Model – User Manual
2. Push the battery module until it is closely
coupled to the camera.
3. Tighten the screw to lock the battery module
to the camera.
2.4 Starting UP
2.4.1 Powering ON / OFF
BrightVR Camera will operate from batteries and when plugged to the AC adapter or plugged to
remote box/cable.
3SECONDS
Powering On
Press and hold down the Power/Mode button for about 3 seconds to turn ON the
camera. The LCD will show MOG logo, and the power status light turns ON.
3SECONDS
Powering OFF
Press and hold down the Power/Mode button for about 3 seconds to turn OFF the
camera. During the shut-down the LCD will show the MOG logo.
When the camera turns OFF, the power status light and the display screen turns
OFF.
2.4.2 Basic Camera Operation
Basic Camera Operation
By default, de camera starts in the recording mode.
Camera Connection
0:00:00
MO
G
0:00:00
MO
G
0:00:00