Specifications

12
Operation
Operating in HOLD Mode
Ensure that power is supplied to the unit and the water trough is filled
It is recommended that the cabinet operates empty before loading with product
- Warm days up to 10 minutes - Cool days up to 30 minutes
1. Set function to HOLD
Indicator light will illuminate when the switch is in the “HOLD” position.
2. Set thermostat to desired holding temperature
Indicator light will illuminate when the elements are cycling on to maintain set temperature.
3. Humidity
The humidity is not used in HOLD mode. The setting on this dial will have no effect as the
wet element is disabled.
4. Thermometer
The thermometer gives an accurate reading of the cabinet temperature to ensure that the
product being held is at the correct temperature.
gpd.sunwayinfo.com.cngpd.sunwayinfo.com.cn