Specification Sheet

www.moffatusa.com
www.turbofanoven.com
U.S.A.
Moffat Inc
3765 Champion Boulevard
Winston-Salem
North Carolina 27105
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax 336-661 9546
Email sales@moffat.com
www.moffatusa.com
G32D5 OVEN
G32D5 Full Size Digital / Gas
Convection Oven on a Stainless
Steel Stand
CONSTRUCTION
Porcelain enameled fully welded oven chamber
Stainless steel front, sides and top exterior
Stainless steel oven fan baffle and oven vent
Removable 5 position stainless steel side racks
Oven racks chrome plated wire (5 supplied)
Stainless steel frame side hinged door
0.2” / 5mm thick door outer glass
0.2” / 5mm thick low energy loss door inner glass
Full stainless steel welded door handle
Stainless steel control panel
Aluminized coated steel base and rear panels
CONTROLS
Electronic controls with Digital Time and Temperature display,
Manual or Program modes
Large ¾” / 20mm high LED displays
Two individual time and temperature setting control knobs
ON/OFF key
Oven Lights key
Timer Start/Stop key
Moisture Injection key (5 levels)
Programs select key
Actual temperature display key
Adjustable buzzer/alarm volume
Thermostat range 150-500°F / 50-260°C
Timer range from 180 minutes in countdown mode
Timer range up to 999 minutes in time count mode for holding,
slow cooking
Direct burner ignition control flame failure safety control
Optional Core Probe temperature range 122-194°F / 50-90°C
Over-temperature safety cut-out
CLEANING
Stainless steel top and side exterior panels
Porcelain enameled oven chamber
Fully removable stainless steel oven side racks
Removable stainless steel oven fan baffle
Easy clean door system with hinge out door inner glass (no
tools required)
Removable plug-in oven door seal (no tools required)
3” / 76mm high stainless steel feet for easy access underside
SPECIFICATIONS
Electrical Requirements
110-120V, 60Hz, 1-phase, 1A
NEMA 5-15P cordset fitted
Gas Requirements
33,000 Btu/hr / 35MJ/hr burner rating
Natural, Propane/Butane models
Unit supplied complete with gas type conversion kit
Gas Connection
½” NPT male
Water Requirements (optional)
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
External Dimensions
Width 28
7
/8” / 735mm
Height 35
7
/8” / 910mm including 4” / 102mm feet
Depth 31
7
/8” / 810mm
Oven Internal Dimensions
Width 18¼” / 465mm
Height 20¼” / 515mm
Depth 27½” / 700mm
Volume 6ft³ / 0.17m3
Oven Rack Dimensions
Width 18” / 460mm
Depth 26” / 660mm
Nett Weight (G32D5)
250lbs / 113kg
SK32 Stainless Steel Stand
All stainless steel welded frame oven stand for Turbofan E32D
and G32D Series ovens
6 position tray runners standard
3” / 76mm diameter wheel swivel castors standard with 2 front
castors with dual swivel and wheel
Welded 1½” and 1¼” square tube front and rear frames
Welded rack supports/side frames
4 dia. 3” / 76mm swivel castors with 2 front castors dual wheel
and swivel lock
Top frame oven supports suit Turbofan E32D and G32D Series
oven mounting
Supplied CKD for assembly on site
External Dimensions (SK32 Oven Stand)
Width 28
7
/8” / 735mm
Height 34
5
/8” / 880mm
Depth 25
5
/8” / 650mm
Nett Weight (SK32 Oven Stand)
40lbs / 18.5kg
Packing Data
Oven (G32D5) Oven Stand (SK32)
289lbs / 131kg 51lbs / 23kg
25ft³ / 0.71m3 3.5ft³ / 0.1m3
Width 29
7
/8” / 760mm Width 32
5
/8” / 830mm
Height 39
3
/4” / 1010mm Height 35½” / 900mm
Depth 36
3
/8” / 925mm Depth 6” / 152mm
INSTALLATION CLEARANCES
NON-COMBUSTIBLE COMBUSTIBLE
SURFACES SURFACES
Rear 3” / 75mm 3” / 75mm
LH Side 2” / 50mm 2” / 50mm
RH Side* 3” / 75mm 3” / 75mm
* For fixed installations a minimum of 20” / 500mm is
required for service
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance
sides is required
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
Designed and manufactured by
ISO9001
Quality
Management
Standard
Manufactured by:
Moffat Limited
45 Illinois Drive, Izone Business Hub
Rolleston 7675, New Zealand
© Copyright Moffat Ltd
US.TFN.S.1601
G32D5