Specification Sheet

610 mm / 24"
880 mm / 34
5
8
"
1602 mm / 63"
680 mm / 26
3
4
"
ELECTRICAL
ENTRY
963 mm / 37
7
8
"
1058 mm / 41
5
8
"
VENT
245 mm / 9
5
8
"
308 mm / 12
1
8
"
VENT
WATER INLET
65 mm / 2
1
2
"
454 mm / 17
7
8
"
www.moffatusa.com
www.turbofanoven.com
U.S.A.
Moffat Inc
3765 Champion Boulevard
Winston-Salem
North Carolina 27105
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax [phone]
Email [e-mail]
www.moffatusa.com
E33T5 OVEN
E33T5 Half Size Convection Oven
TOUCH SCREEN CONTROL
CONSTRUCTION
Porcelain enameled fully welded oven chamber
Stainless steel front, sides and top exterior
Stainless steel oven fan baffle and oven vent
Removable 5 position stainless steel side racks
Stainless steel frame side hinged door
0.2” / 5mm thick door outer glass
0.2” / 5mm thick low energy loss door inner glass
Stainless steel control panel
Aluminised coated steel base and rear panels
CONTROLS
5.7” LED backlit touch screen
Icon driven program menu
BMP image icon imports via USB port
Program updates via USB port
Temperature range 85-500°F
Adjustable sounder tones and volume
Other specification on request
Safety thermostat cut-out
Optional core temperature probe
CLEANING
Stainless steel top and side exterior panels
Porcelain enameled oven chamber
Fully removable stainless steel oven side racks
Removable stainless steel oven fan baffle
Easy clean door system with hinge out door inner glass
(no tools required)
Removable push fit oven door seal (no tools required)
3” / 76mm high stainless steel feet for easy access underside
SPECIFICATIONS
Electrical Requirements
208V, 60Hz, 1P+N+E, 5.4kW, 26A
220-240V, 60Hz, 1P+N+E, 6.0kW, 25A
No cordset supplied
Water Requirements (optional)
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
External Dimensions
Width 24” / 610mm
Height 28¾” / 730mm including 3” / 76mm feet
Depth 26¾” / 680mm
Oven Internal Dimensions
Width 13” / 330mm
Height 20¼” / 515mm
Depth 22½” / 570mm
Volume 3.53ft³ / 0.10m3
Oven Rack Dimensions
Width 13” / 330mm
Depth 20
7
/8” / 530mm
Nett Weight (E33T5)
158lbs / 71.5kg
Packing Data (E33T5)
205lbs / 93kg
Width 25¾” / 655mm
Height 31¾” / 805mm
Depth 32¾” / 830mm
Volume 15.5ft³ / 0.44m3
SK33 Stainless Steel Stand
All stainless steel welded frame oven stand for Turbofan
E33D and E33T Series ovens
5 position tray runners standard
Welded 1½” / 38mm and 1¼” / 32mm square tube front and
rear frames
Welded rack supports/side frames
3” / 76mm diameter swivel castors standard with 2 front
castors wheel and swivel lock
Supplied CKD for assembly on site
External Dimensions (SK33 Oven Stand)
Width 24” / 610mm
Height 34
5
/8” / 880mm
Depth 25
5
/8” / 650mm
Nett Weight (SK33 Oven Stand)
40lbs / 18kg
Packing Data (SK33 Oven Stand)
45lbs / 20.5kg
3.53ft³ / 0.10m3
Width 29¾” / 755mm
Height 31¼” / 795mm
Depth 6¼” / 160mm
INSTALLATION CLEARANCES
Rear 2” / 50mm
LH Side 2” / 50mm
RH Side* 3” / 75mm
* For fixed installations a minimum of 20” / 500mm is
required for service
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance
sides is required
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
Designed and manufactured by
ISO9001
Quality
Management
Standard
Manufactured by:
Moffat Limited
45 Illinois Drive, Izone Business Hub
Rolleston 7675, New Zealand
© Copyright Moffat Ltd
US.TFN.S.1601
E33T5